The PS654-8EK is a 7,500 lb 110V industrial worm gear winch with the compact 8 in drum — for shop floors, dock loading, and fixed-install pulling where 110V single-phase wall power is available. The worm gear is mechanically self-locking by design, so the load stays exactly where you stopped pulling.
Why pick 110V over 12V for an industrial winch?
Three reasons. You’re pulling continuously and don’t want to drain a battery (110V runs off shop or building power). You need the winch fixed in one shop or dock location, not on a moving truck. Or you don’t have a 12V system at all — 110V plugs into the right standard circuit, after a certified electrician confirms it’s wired for the load.
- 7,500 lb rated pulling capacity
- 110V AC, 1.5 HP motor — 17.4 amp draw
- Worm gear drive, 460:1 single-stage reduction
- 4 fpm max line speed — safe, controlled pulling
- Worm gear brake — mechanically self-locking, no clutch slip
- Dog clutch — manual engagement at the winch for free-spool
- Cast metal construction
- 8 in drum (3.5 in × 8 in), holds 100 ft of ⅜ in wire rope
- Includes PBM1 cradle mount and wired control pendant
- Pierce SKU PS654-8EK — built to order in 1–2 business days
For more line capacity at the same pulling power, see the 7,500 lb 110V Worm Gear Winch (11 in Drum). For higher pulling capacity in the same 8 in drum, see the 11,000 lb 110V Worm Gear Winch (8 in Drum). For dual-cable splits, see the 7,500 lb 110V Worm Gear Winch (8 in Split Drum). For 12V battery-powered industrial pulling, see the 9,000 lb 12V Worm Gear Winch (8 in Drum).
⚠️ 110V installation requires a certified electrician. Confirm circuit amperage, grounding, and overcurrent protection before energizing.
⚠️ Never use a winch for lifting or moving people. Pulling and recovery use only.
