The PS654-11EKSD is the long-split-drum version of the 7,500 lb 110V industrial worm gear winch — same dual-cable configuration as the 8 in split drum, with 50% more rope per side. Two independent ⅜ in × 75 ft cables for dual anchor pulls or balanced two-point lifts where reach matters.
Should I pick the 8 in or 11 in split drum?
Pick the 11 in split if you need the extra reach per side — long shop floor pulls, dock loads where you can’t get close to the anchors, or jobs where each side of the pull needs more rope on the drum after the load is set. Pick the 8 in if 50 ft per side is plenty and mounting space is the constraint.
- 7,500 lb rated pulling capacity (total across the drum)
- Two independent cable halves on a single split drum
- 110V AC, 1.5 HP motor — 17.4 amp draw
- Worm gear drive, 460:1 single-stage reduction
- 4 fpm max line speed — safe, controlled pulling
- Worm gear brake — mechanically self-locking, no clutch slip
- Dog clutch — manual engagement at the winch for free-spool
- Cast metal construction
- 11 in split drum (3.5 in × 11 in), holds 75 ft of ⅜ in wire rope per side
- Includes PBM1 cradle mount and wired control pendant
- Pierce SKU PS654-11EKSD — built to order in 1–2 business days
For tighter mounting at the same total capacity, see the 7,500 lb 110V Worm Gear Winch (8 in Split Drum). For a single-cable winch on the same 11 in drum, see the 7,500 lb 110V Worm Gear Winch (11 in Drum).
⚠️ 110V installation requires a certified electrician. Confirm circuit amperage, grounding, and overcurrent protection before energizing.
⚠️ Never use a winch for lifting or moving people. Pulling and recovery use only.
