The PS654-11EK is the long-drum version of the 7,500 lb 110V industrial worm gear winch — same pulling power as the 8 in version, with 25% more rope capacity on the drum. The worm gear is mechanically self-locking, so the load stays put when you stop pulling. 460:1 ratio, 4 fpm line speed.
When does the 11 in drum make sense?
Pick the 11 in drum when the pull distance is longer — across a shop floor, between dock and trailer, or anywhere the 100 ft rope on the 8 in drum runs short. Frame footprint is bigger than the 8 in version, so confirm your mounting location has the room before ordering.
- 7,500 lb rated pulling capacity
- 110V AC, 1.5 HP motor — 17.4 amp draw
- Worm gear drive, 460:1 single-stage reduction
- 4 fpm max line speed — safe, controlled pulling
- Worm gear brake — mechanically self-locking, no clutch slip
- Dog clutch — manual engagement at the winch for free-spool
- Cast metal construction
- 11 in drum (3.5 in × 11 in), holds 125 ft of ⅜ in wire rope
- Includes PBM1 cradle mount and wired control pendant
- Pierce SKU PS654-11EK — built to order in 1–2 business days
For tighter mounting space at the same pulling power, see the 7,500 lb 110V Worm Gear Winch (8 in Drum). For higher pulling capacity on the same 11 in drum, see the 11,000 lb 110V Worm Gear Winch (11 in Drum). For dual-cable splits, see the 7,500 lb 110V Worm Gear Winch (11 in Split Drum). For 12V battery-powered industrial pulling, see the 9,000 lb 12V Worm Gear Winch (11 in Drum).
⚠️ 110V installation requires a certified electrician. Confirm circuit amperage, grounding, and overcurrent protection before energizing.
⚠️ Never use a winch for lifting or moving people. Pulling and recovery use only.
