47 Gallon Aluminum DOT Combo Refueling Transfer Tank Description
This 47 gallon aluminum refueling transfer tank is designed for diesel and gasoline, with toolbox.
*DOT Certified for Gas, Diesel, Methanol, Kerosene, Aviation fuel and other liquids.
Please Note: Additional freight charges will be included on all tanks going to Alaska, Hawaii, Puerto Rico and non-commercial addresses.
Attention: Adhere to these guidelines before installation. Failure to follow these guidelines will result in voiding your warranty.
- The fill cap location and pump location cannot be swapped.
- Do not install risers between the fuel tank fitting and the pump.
- Do not use extension pipes to raise the height of the transfer pump.
- Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used. The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc.
Notes:
- Mounting tabs extend out 1-1/2 in.
- Add 2-1/2 in. for cap height
- Pumps with aluminum threads must be coated with Anti-Seize prior to installation. Do not dry fit. Do not use teflon tape or pipe dope.
- Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used.
- This tank must be grounded to your vehicle. Metal to metal contact between mounting hardware and truck bed or running a ground wire to one of the mounting bolts.
* The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc. Failure to follow these guidelines will result in voiding your warranty. Do not install riser between the fuel tank fitting and the pump.
