Complete wireless air actuator control system – includes the Standard handheld transmitter and a receiver with the pneumatic solenoid valves built into the box, coded together and ready to wire to your equipment. Operates 6 functions on the Lodar 9 Series.
The 6 Function Lodar Standard Wireless Air System (92156-8) gives you 6-function wireless control with a 150 ft (45 m) range. Compressed air is plumbed into the receiver box; the solenoid valves inside switch it to the output ports to drive your air cylinders directly – there is no separate external valve bank. Actuators are included — they bolt onto the solid rods behind your control levers and stroke them for you, working the equipment exactly as if you were pulling each lever by hand. It includes a master output – an additional output that energizes whenever any function is operated, for equipment that has to run alongside the controls (a hydraulic power unit during a lift, or a beacon while winching).
Check your valve linkage before ordering. The actuators bolt onto the solid control rods your valve levers connect to, so you need clearance to mount them. A system with actuators included works only with solid “bang-bang” valve rods – not with valves operated by flexible cables or cords. If your valves are cable-operated, contact us.
Air supply. The air cylinders run on 21-120 psi (135 psi maximum); 80-100 psi is the ideal operating range. Plumb the system into a regulated air supply in that range.
How do I know this system fits my equipment?
Match the function count to the number of outputs you need to operate – 6 here – and confirm your power supply: this system runs on 12/24V DC. Each FET output is rated to 10 A, with the system rated to 15 A total across all outputs. Run several heavy functions at once and the combined draw can reach that 15 A ceiling, where the overload protection trips to protect the board. Solid-state switching means there are no mechanical relay contacts to wear or arc. It is the current standard across the Lodar line — choose it for functions that draw more than the 5 A per output a mechanical relay handles. The transmitter and receiver ship coded to each other, so the system works out of the box.
- 6 functions of wireless control
- 6 functions = 3 double-acting valves, two directions each
- Standard transmitter – IP 54 rated
- Air receiver – pneumatic solenoid valves built in, IP 67 rated
- Air actuators included
- 12/24V DC operating voltage
- 150 ft (45 m) operating range
- Master output – fires on every function for run-along equipment
- Lodar SKU 92156-8
Lodar 9 Series parts carry a trailing match code. This system ships as the -8 (the most common). If you are adding to or replacing parts in an existing Lodar system coded anything other than -8, contact us so the units pair correctly.
Want a different form of the same 6-function Lodar system? Compare the 6 Function Lodar Stainless IP Wireless System or 6 Function Lodar Standard Wireless Electric Actuator System. Replacement handsets and receivers are sold separately.
Common uses: Tow trucks, agriculture, and industrial service fleets.
