- Product Specification
- Shipping
- Refund
Product Specification
Flap Wheel Abrasive Sanding DrumNonwoven
The 4-1/2″ x 4″ Nonwoven Surface Conditioning Drum from Benchmark Abrasives is designed for controlled metal finishing where consistency and surface quality take priority. Rather than aggressive stock removal, this drum focuses on smoothing, blending, and preparing metal surfaces for downstream finishing or polishing steps.
The 4-1/2″ x 4″ Nonwoven Surface Conditioning Drum from Benchmark Abrasives is designed for controlled metal finishing where consistency and surface quality take priority. Rather than aggressive stock removal, this drum focuses on smoothing, blending, and preparing metal surfaces for downstream finishing or polishing steps.
The 4-1/2″ x 4″ Nonwoven Surface Conditioning Drum from Benchmark Abrasives is designed for controlled metal finishing where consistency and surface quality take priority. Rather than aggressive stock removal, this drum focuses on smoothing, blending, and preparing metal surfaces for downstream finishing or polishing steps.
With a wide 4-inch working face, the drum increases coverage on flat and contoured surfaces alike, reducing the number of passes needed on larger components. It is commonly used for light oxidation removal, surface blending, satin finishing, and final-stage conditioning before buffing or coating operations.
Quantity: 1 piece
Dimensions
- Face Width4
- Head Diameter4-1/2
- MaterialNonwoven Material
- DiameterKeyway
- Available Grits60 (Coarse), 120 (Medium), 240 (Fine), 320 (Very Fine), 400 and 600 grits
- Max RPM4,000
Machines Used On:
- Surface finishing machines, linear grinders, burnishers, contouring grinders, and burnishing machines aka Drum Sanding Machines
Application:
- Ferrous MaterialsCast Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
- Non-Ferrous Materials – Copper
- Other MaterialsFiberglass, Plastic, Hard Rubber, Wood, Stone
- Dry use ONLY
- This non-woven surface conditioning drum is especially well suited for:
- Deburring and edge cleanup
- Light paint and rust removal
- Oxidation cleanup
- Blending scratch patterns
- Creating satin or brushed finishes
- Final-stage conditioning before buffing or polishing
- General surface prep without gouging or removal of base material
Safety Tips & Techniques:
- Apply light pressure and let the tool do the work. Bearing down on the tool will result in reduced tool life.
- Always wear proper PPE, including (but not limited to) safety glasses, hearing protection, respirator, and hand protection. Keep all guards in place on your machine.
- Avoid use on electric power drills; the slower speeds can result in chipping of your workpiece.
