Complete wireless air actuator control system – includes the IP handheld transmitter and a receiver with the pneumatic solenoid valves built into the box, coded together and ready to wire to your equipment. Operates 2 functions on the Lodar 9 Series.
The 2 Function Lodar IP Wireless Air System (92250-8) gives you 2-function wireless control with a 200 ft (61 m) range. Compressed air is plumbed into the receiver box; the solenoid valves inside switch it to the output ports to drive your air cylinders directly – there is no separate external valve bank. Actuators are included. This version has no master output. Choose a master-output model if you need an extra output that fires alongside every function – for example, an HPU that must run during a lift.
Check your valve linkage before ordering. The actuators bolt onto the solid control rods your valve levers connect to, so you need clearance to mount them. A system with actuators included works only with solid “bang-bang” valve rods – not with valves operated by flexible cables or cords. If your valves are cable-operated, contact us.
Air supply. The air cylinders run on 21-120 psi (135 psi maximum); 80-100 psi is the ideal operating range. Plumb the system into a regulated air supply in that range.
How do I know this system fits my equipment?
Match the function count to the number of outputs you need to operate – 2 here – and confirm your power supply: this system runs on 12/24V DC. Each FET output is rated to 10 A, with the system rated to 15 A total across all outputs. Run several heavy functions at once and the combined draw can reach that 15 A ceiling, where the overload protection trips to protect the board. Solid-state switching means there are no mechanical relay contacts to wear or arc. It is the current standard across the Lodar line — choose it for functions that draw more than the 5 A per output a mechanical relay handles. The transmitter and receiver ship coded to each other, so the system works out of the box.
- 2 functions of wireless control
- IP (Industrial Pro) transmitter – IP 65 rated
- Air receiver – pneumatic solenoid valves built in, IP 65 rated
- Air actuators included
- 12/24V DC operating voltage
- 200 ft (61 m) operating range
- No master output
- Lodar SKU 92250-8
Lodar 9 Series parts carry a trailing match code. This system ships as the -8 (the most common). If you are adding to or replacing parts in an existing Lodar system coded anything other than -8, contact us so the units pair correctly.
Want a different form of the same 2-function Lodar system? Compare the 2 Function Lodar Stainless IP Wireless System or 2 Function Lodar Standard Wireless System. Replacement handsets and receivers are sold separately.
